Our Lichfield Gas Engineer
Power Flushing in Lichfield
Broken down boilers or noisy radiators that need regular bleeding usually indicate that your central heating system needs power flushing. The plumbing and heating experts at Our Lichfield Gas Engineer have extensive experience when it comes to utilising the latest in power flushing technology. Central heating power flushing in Lichfield is a process which is carried out for cleaning your heating radiator system. It can improve heating system performance by up to 30% . The process of flushing a central heating system involves forcing out sludge and scale, increasing the heat output of radiators and promoting energy efficiency. All of this means cheaper gas bills for you.
Power flushing can solve heating problems and prevent pump failure and can even provide lower fuel bills due to an increase in boiler efficiency. This is because the action of Power flushing the central heating improves circulation through the pipe work, so the radiators and gas boiler do not have to work so hard.
Power Flushing for New Central Heating Installations
Having a new central heating system installed can be expensive, so you want to make sure the manufacturer will cover the warranty. You should be aware that most boiler manufacturers will not guarantee a new boiler if the system is not chemically cleaned. The British Standards (BS7593) and the Benchmark demand thorough cleaning of the heating systems and power flushing in Lichfield is the most preferred method. Additional protection of your heating system can be maintain by adding a magnaclean or even a Fernox TF1. These products and many more will prolong the life of your gas boiler and central heating system.
Why Power Flush for Winter?
Power flushing is an effective method used to clean heating systems. It can improve efficiency and give you peace of mind knowing that your heating system won’t break down on you when you need it the most. It can also reduce your fuel bills which means saving money in the long run.
How to Power Flush
Power flushing involves pumping water and chemicals at a high velocity through the heating system to force out sludge which has accumulated over time, due to the poor treatment of system.Our process is made more effective by the addition of a powerful magnet which is connected to the machine to collect the sludge. If you want we can even collect the deposit of sludge for you to view at the end of the job. You will be surprised by the amount that comes out of the system. Once this process is completed we neutralise the system and then add the corrosion inhibitor which protects the system from future rust damage.